Interactive Procedure:
1. Select the restore action.
2. Select the medium.
3. Check the entries.
4. Start the restore operation.
5. Mount the next medium and continue the restore operation.
Steps 1 to 4 are the same as for restoring from an individual medium.
If the medium does not contain the complete backup, the progress indicator stops before reaching 100%, and a screen appears requesting you to mount the next medium.
5. Mount the Next Medium and Continue the Restore Operation
If the medium is a tape, simply mount the next tape. If the medium is a file, you can specify the path name of the next file. You can also select another type of medium for the next medium. The restore operation is continued with the Ok button.
In the "device", "type, and "Label" fields, the screen shows the specifications valid for the previous medium. after pressing the 
key, the "Device" field is updatable.
The Ignore button is meaningless in this case.
After confirming the next medium with the Ok button, CONTROL displays the label information read from the specified medium. Only after clicking again on the Ok button, the restore operation is continued.
Step 5 must be repeated as often as is needed to terminate the recovery or until it is canceled.
Batch Call:
No batch call is provided for restoring from several media in succession. We recommend to use external backup tools or autoloaders in this case.